Connecting The Scsi Cable (When The Scanner Is At The End Of The Daisy Chain) - Ricoh IS760 Operating Instructions Manual

Setting up the Scanner

Connecting the SCSI Cable (When the Scanner is at the End of the Daisy Chain)

A A A A
Shut down the computer and all of the SCSI connected devices.
B B B B
Daisy chain the computer, scanner and SCSI connected devices.
2
Note
❒ Connect the SCSI cable to either one side of the connectors.
C C C C
Open the cover of the switch box on the lower left of the frontside of the
scanner.
Note
❒ Push the knob of the cover to the left and pull the cover to open.
D D D D
Set the DIP Switch No.3 to the OFF position.
Built-in SCSI terminator is enabled.
24
ADC018S
ADC015S
ADC019S