Disengaging the lock for transportation
In this section, we explain how to disengage the lock after you take the scanner
out of the package for transportation.
A A A A
Remove two lock screws fixed on the back of this machine.
Note
❒ Use a coin to remove the lock screws.
❒ Be sure to remove the lock screws. Turning the power on without remov-
ing the screws could result not only in failure in scanning, but in malfunc-
tion of this machine.
B B B B
Cover both holes left by the removed screws with the caps.
A Put the leg stopper of the caps into the holes vertically.
B Turn the caps 90 degrees.
ADC082S
ADC084S
Confirmations Before the Setup
2
13