Setting The Scsi Id - Ricoh IS760 Operating Instructions Manual

Setting up the Scanner

Setting the SCSI ID

A A A A
Open the cover of the switch box on the lower left of the frontside of the
scanner.
2
Note
❒ Push the knob of the cover to the left and pull the cover to open.
B B B B
Confirm the DIP Switch No.1 to the OFF position.
SCAM function is disabled.
C C C C
Set the SCSI ID by rotating the Rotary Switch.
Note
❒ Press the Hard Reset Switch if you changed the SCSI ID while the power is
ON. ⇒ p.34 "Using the Hard Reset Switch"
22
ADC015S
ADC069S
ADC017S