Table of Contents
Advertisement
Installing Software
F F F F
In the Wizard, select [Search for a suitable driver for my device [recommended]],
and continue the "Found New Hardware Wizard" to the end, according to
the instruction on the display.
Note
❒ When an instruction to set the Windows system CD-ROM appears on the
display in the course of the installation, follow the instruction accordingly.
❒ Even when "No approval of the logo test" appears on the display, you can
continue the installation by clicking [Continue].
3
-
-
-
- Changing the connecting interface
When you change the connecting interface from the interface first installed,
change the cable to the new interface and start from step D. "Scanner Driver(s),
Utilities and Operating Instructions" CD-ROM is not required.
Note
❒ Please confirm the DIP Switch when you connect each cable.
42
Advertisement
Table of Contents
