Connecting To A Power Source - Ricoh IS760 Operating Instructions Manual

Connecting to a Power Source

This section explains how to connect this machine to a power source, using a
bundled AC power cord.
R WARNING:
• Do not use with a power source with a voltage different from the specified voltage. Do not
use a power outlet with multiple devices plugged in. These could create the risk of fire or
electric shock.
• Avoid the use of an extension cord.
• Do not damage, break, twist or modify the Power Cord. Placing heavy objects on the cord,
pulling on or bending it excessively can damage the Power Cord, creating the risk of fire or
electric shock.
• Never touch or unplug the power plug with wet hands. This can create the risk of electric
shock.
R CAUTION:
• When unplugging from an outlet, be sure to grasp the plug when pulling. Never pull on the
cord. This could damage the cord creating the risk of fire or electrical shock.
A A A A
Confirm that the power switch is set to Off.
B B B B
Confirm the lock screws on the back of this machine are removed and the
holes left by the removed screws are covered with the caps.
ADC124S
ADC088S
Connecting to a Power Source
2
31