Setting The Scsi Id Automatically - Ricoh IS760 Operating Instructions Manual

Setting the SCSI ID Automatically

Note
❒ If you use the SCSI board without SCAM function or the SCSI ID is overlap-
ping with the other SCSI device, set the SCSI ID manually.
A A A A
Open the cover of the switch box on the lower left of the frontside of the
scanner.
Note
❒ Push the knob of the cover to the left and pull the cover to open.
B B B B
Set the DIP Switch No.1 to the ON position.
SCAM function is enabled.
ADC015S
ADC016S
Connecting to the Computer
2
23