Table of Contents
Advertisement
Using the TWAIN Driver
What You Can Do with the TWAIN Driver
The following is an introduction to the various functions of the TWAIN driver:
Reference
For more information about these functions or other functions, see TWAIN
driver Help.
Functions of the TWAIN Driver
Functions
Scan Mode
5
Orientation:
Comb./Series
256 Colors
(in [Col./Grad])
Endorser
ICM: (in
[Color Matching])
Deskew
Start from Scan-
ner
Preview
SADF
60
About
4 Basic modes
(Standard/Photo
/OCR/Filing),
User saved 100 scan
modes
Standard 0 deg.
/Right 90 deg.
/180 deg.
/Left 90 deg.
Combine 2 pages to 1
/Combine 4 pages to 1
/divide to 2 pages
/Do not divide
/No combination or di-
vision
←
User set charactors
/Date/Counter:
←
←
←
←
←
Explanation
You can call out and save the original Scan
Modes.
You can rotate the image to have originals
scanned in correct orientation depending on the
place to set the originals. If you are scanning the
duplex printed originals, set the [Scan Settings:]
as well.
You can divide two-page spread originals to two
individual page images, or combine duplex
printed originals to a simplex one page image.
Reduces 24bit color data to 8bit to make the data
size smaller.
You can add the information mentioned in the
left to the scanned images. You can change the
size and the fonts of the endorser.
When you enable ICM, the TWAIN Driver will
match the color data according to the color pro-
file.
Detects and corrects the tilt of the text strings.
Press the { { { { Start} } } } key of the scanner to start scan-
ning the originals.
You can confirm the settings you made for the
scanning images before scanning the originals.
Scanning starts when you set the originals on the
ADF. When you are scanning the originals which
are apt to be double fed, enable SADF and set the
originals one by one on the ADF.
Advertisement
Table of Contents
