1. Guide to Components
Guide to This Scanner
1.
ADF (Automatic Document Feed-
er)
Allows you to automatically load multi-
ple originals into this machine.
2.
Paper Thickness Changeover Le-
ver
When you scan the thick originals —
originals thicker than 128g/m
— with the ADF, set the paper thickness
changeover lever to your side. After scan-
ning, return the switch to the back side.
3.
Original Table
Set originals here to be loaded into this
machine using ADF.
4.
Output Table
The originals that have been loaded by
the ADF are output here after scanning.
5.
Original Stopper
Stops the originals scanned by the ADF.
6.
Rotary Switch
Use to set SCSI ID.
7.
DIP Switches
Use to set the operation mode of this
scanner. ⇒ p.10 "DIP Switches"
8.
Hard Reset Switch
This switch resets the power to the scan-
ner. Use this switch when validate the
settings of the DIP Switches or the Rotary
2
Switch.
(242.5bls)
9.
Indicators
Indicates the status of this machine. ⇒
p.9 "Understanding Indicators"
{ { { { Clear Modes} } } } key
10.
Press this key to stop the manual scan-
ning.
{ { { { Start} } } } key
11.
Press this key to start the manual scan-
ning
12.
Power Switch
Turns this machine's power on and off.
ADC002S
7