Table of Contents
Advertisement
Setting up the Scanner
Installing Options
Installing the Image-Processing Unit
Important
❒ Touch any metallic material before touching the image-processing unit to re-
2
move static from your body.
Note
❒ Use the accessory tool to remove or fix the screws.
A A A A
Turn OFF the power to this product and disconnect all cables connected to
the product, including the power cable.
B B B B
Remove the three screws on the lower back surface of the product.
C C C C
Pull out the scanner control unit by pulling the black ribbon on the center
of the board.
Important
❒ The control unit is heavy. Please take care not to drop it when pulling it
out.
16
ADC009S
ADC010S
Advertisement
Table of Contents
