Setting up the Scanner
❖ ❖ ❖ ❖ Environment
Important
❒ Do not set up the scanner in any of the following types of locations. It may
be the cause of the malfunction.
• In a location exposed to direct sunlight
• In a location where the scanner will be subjected to blowing air or radi-
2
ant heat, such as near an air conditioner or heater
• In a location near other electronic devices, such as a radio or television
set
• In a location subject to extreme temperatures or humidity
• Near a humidifier
Set up the scanner in a location where the temperature and humidity will fall
within the ranges shown below.
Important
❒ Save the box and cushioning material in which the scanner was packed so
that they can be used if it is necessary to transport the scanner in the future.
❒ When the machine is moved from a cold location to a warm location, sud-
den temperature changes cause condensation inside of the scanner. Wait
one hour or more before turning on the scanner to allow the condensation
to evaporate.
12
ADC123S