Setting up the Scanner
Using the Hard Reset Switch
You need to hard reset the scanner when validate the settings of the DIP Switch-
es or the Rotary Switch. To hard reset the scanner, you can turn off the scanner
and turn it on again, or follow the procedures below.
A A A A
Open the cover of the switch box on the lower left of the frontside of the
2
scanner.
Note
❒ Push the knob of the cover to the left and pull the cover to open.
B B B B
Press the Hard Reset Switch.
The scanner will be in the same status as when you turn off the scanner and
turn it on again.
34
ADC015S
ADC029S