Note
❒ Press the Hard Reset Switch if you changed the SCSI ID while the power is
ON. ⇒ p.34 "Using the Hard Reset Switch"
Using the Scanner only with the SCSI Connection
You can set the scanner to the SCSI synchronous transmission for high-speed
data transfer and shorten the total scan time. The USB and the optional IEEE1394
connection cannot be used when the SCSI synchronous transmission is set.
A A A A
Open the cover of the switch box on the lower left of the frontside of the
scanner.
Note
❒ Push the knob of the cover to the left and pull the cover to open.
B B B B
Set the DIP Switch No.2 to the OFF position.
SCSI synchronous transmission is enabled.
Note
❒ Press the Hard Reset Switch if you changed the DIP Switch while the pow-
er is ON. ⇒ p.34 "Using the Hard Reset Switch"
ADC015S
ADC079S
Connecting to the Computer
2
27