Setting The Scsi Id; Connecting The Scsi Cable (No Connection To Other Port) - Ricoh G410 Operator's Manual

Important
The total length of the SCSI cables, in-
cluding the length of the cable inside
the personal computer, should be no
more than 3m (9.8 ft.) when using syn-
chronous transfer, and no more than 6m
(19.7 ft.) when using asynchronous
transfer.
Some combinations of SCSI boards and
peripheral devices that are connected
simultaneously may not work together
properly.

Setting the SCSI ID

A
Turn the rotary switch to set the SCSI
ID number.
Note
If you change the setting while the
power is on, it is necessary to initialize
the scanner. Refer to P.16, "Initializ-
ing the Scanner."
Connecting to the Host Computer
Connecting the SCSI Cable
(No Connection to Other Port)
A
Turn off the host computer and all
peripheral devices that will be con-
nected through the SCSI interface.
B B B B B
Use SCSI cables to connect the per-
sonal computer and the peripheral de-
vices in daisy chain fashion, with this
scanner at the end of the daisy chain.
(Use either of the two SCSI connec-
tors on the scanner.)
C C C C C
Set DIP switch 3 to off.
This enables the scanner's internal termi-
nator. For details on the functions of the
DIP switches, refer to P.43, "DIP
Switches."
11