Advertisement
Enabling To USB and From USB Functions
1. Insert a USB Memory stick (FAT32 file format) into a USB port on the side of the unit.
2. Wait for the USB memory to be detected (the folder icon will change to a green USB memory icon).
After the unit detects the USB memory stick, files can be downloaded to or restored from USB.
Downloading Files To USB
1. Select the test results, test profiles, screen capture and protocol capture files to be saved. For a full
backup, tap the check box in the top header row to select all files.
2. Tap the To USB button to initiate the file transfer procedure and wait for the progress bar to finish.
Original files won't be deleted from the test set.
3. When all files have been copied to the USB, tap the folder icon (top-right corner) and select Remove
USB Drive to make sure all cached data is transferred to the USB drive, especially when trans-
ferring small files.
Bluetooth (BT) File Transfer requires a compatible USB dongle.
67
Imports (restores) all test results, test profiles and screenshots stored in an attached
USB Memory Stick. The included On-The-Go (OTG) micro-B USB to USB-A
adapter cable is required for the USB memory stick.
Exports (backup) all selected test results, test profiles and screenshots stored to an
`
attached USB Memory Stick. The included On-The-Go (OTG) micro-B USB to USB-
A adapter cable is required for the USB memory stick.
Transfers selected test results, test profiles and screenshot files to a paired
Bluetooth® smartphone, tablet or PC.
© VeEX Inc. All Rights Reserved.
Platform Functions
Advertisement
