Advertisement
the server IP/URL and save it to a server list that can be maintained and managed on its
own. Options to modify or delete server lists are available under Server List Manage.
Manual – Advanced users, with detailed knowledge of their Speedtest servers, can manu-
l
ally add their own servers, test files and maintain their own server lists. Enter the IP/URL of
the server to test. If TCP port number 8080 is used, there is no need to enter a Path and
File name. Port 8080 is used by Ookla netgauge servers, therefore the proper Speedtest
handshaking will take place between the test set (client) and Ookla server. If TCP port num-
ber 80 is used, the correct Path and Filename need to be entered.
Tap
to switch to the Basic V-TEST view.
More about Link Statuses
Link Status Indicator Labels
A yellow status box will be displayed when the link has been properly established with the port
under test and it is considered active.
10GE: 10 Gbit/s, 10GBASE-T copper interface (RJ45 UTP) or 10GBASE-
5GE: 5 Gbit/s, 5GBASE-T copper interface (RJ45 UTP) or 5GBASE-X
2.5GE: 2.5 Gbit/s, 2.5GBASE-T copper interface (RJ45 UTP) or
1GE: 1 Gbit/s, 1GBASE-T copper interface (RJ45 UTP) or 1GBASE-
1000T: 1 Gbit/s, 1000BASE-T copper interface (RJ45 UTP)
100T: 100 Mbit/s, 100BASE-T copper interface (RJ45 UTP)
10T: 10 Mbit/s, 10BASE-T copper interface (RJ45 UTP)
FDX: Full Duplex
HDX: Half Duplex
UTP: Unshielded Twisted (copper) Pairs cable
MTX150x Lite Quick
Guide
X optical interface (LC-UPC duplex)
optical interface (LC-UPC duplex)
2.5GBASE-X optical interface (LC-UPC duplex)
optical interface (LC-UPC duplex)
© VeEX Inc. All Rights Reserved.
144
Advertisement
