Advertisement
Ping Setup
Profile: Delete, Save, Save as..., or Default.
l
Destination: Press the drop -down menu and enter the destination IP address or URL to ping.
l
Number of Pings: Enter the number of ping attempts (up to 10000)
l
that will be performed to reach the network device.
If Continuous Ping is selected, the user is not required to enter the number of pings. The test
set will continuously ping the target host until the user presses Stop.
Length: Enter the length of the ICMP echo request packet transmitted.
l
Ping/Sec: Enter the Ping repetition rate (Ping/second).
l
Time Out: Time-to-Live (TTL) in milliseconds. Enter the maximum time allowed (in ms, up to 99999
l
ms) between an ICMP ping and echo response.
Once the parameters are configured, press Start to begin the test.
Ping Results
Pressing Ping will take you to the Result tab and start the Ping test.
39
Ping Setup
© VeEX Inc. All Rights Reserved.
Ethernet
Advertisement
