Advertisement
VLAN: Off, 1 Tag, 2 Tags. For each VLAN tag, enter the following:
l
ID: VLAN ID. Enter value 0 to 4095.
l
Pri: VLAN priority 0 to 7.
l
Status
Ensure the Status is PASS before continuing with any IP tests. If the connection fails, go back to the setup
screen to verify that the parameters are entered correctly. Verify that the Ethernet cable is properly connected
on the management port on the left hand side of the unit.
DHCP: PASS indicates that an IP address has successfully been assigned.
l
IP: PASS indicates that the IP address assigned has been verified to be unique in the network.
l
Gateway: PASS indicates that the gateway IP address is valid.
l
DNS: PASS indicates that the DNS IP address is valid.
l
Trace Route
Trace Route is a common method used to find the route to the destination IP address or URL. It is often used to
identify routing problems and unreachable destinations. All the remote IP addresses and their response times
are displayed indicating possible network congestion points.
35
PASS Status
© VeEX Inc. All Rights Reserved.
Ethernet
Advertisement
