Advertisement
Trace Route
Trace Route is a common method used to find the route to the destination IP address or URL. It is often used to
identify routing problems and unreachable destinations. All the remote IP addresses and their response times
are displayed indicating possible network congestion points.
Trace Route Setup
The following setup selections are available:
Profile: Delete, Save, Save as..., Default. Select Default to recall a trace route file or create a new
l
test
Destination: Enter the IP address or URL of the network device to be detected
l
Time Out: Enter the maximum time allowed between an ICMP echo and response at each hop
l
Max Hop: Enter the maximum number of network devices the packet is allowed to transit
l
Once the parameters are configured, press Start to begin the test.
Platform Functions
Trace Route - Setup
© VeEX Inc. All Rights Reserved.
100
Advertisement
