Advertisement
10 GE Port
10GE Mode: LAN or WAN
l
WIS Mode (only available in WAN mode): SDH or SONET
l
Flow Control: Enable chosen as default option
l
Clock Offset (ppm): The frequency may be offset in parts per million
l
Link Fault Response: Disable or Enable (also enables Local link and failure, remote, failure)
l
Transmit Ignore Link Status: On/Off
l
Synchronous Ethernet: (SyncE) Disabled or Enabled. When Enabled, makes the signal traceable
l
to an internal or external reference clock.
Measurement Settings
The measurement and event log settings are configured in this screen.
Mode: Manual, timed, or auto mode are available.
l
Manual mode: Starts and stops the measurements manually.
l
Timed mode: Defines the duration of the test; after the test is started, the test will run for the
l
configured duration and stop automatically.
31
Measurement Setup
© VeEX Inc. All Rights Reserved.
Ethernet
Advertisement
