Advertisement
User Interface: The USA user interface version presents SONET/DSn application-oriented menus,
l
while the International setting is more open to all settings.
WiFi Auto Connect: After successfully connecting to a WiFi access point, the unit will attempt to
l
automatically connect to the same AP after the unit is turned off and turned back on.
OTG Port Mode: Configures the micro USB port for any USB device connected via an OTG cable.
l
Later V150 models will automatically detect and configure the OTG port to host or device mode.
Host: Enables the micro-B USB port to connect with USB devices such as a USB memory
l
stick or Fiberscope. USB devices (dongles) will not be recognized if the OTG port is not set to
Host mode.
Device: Enables the micro-B USB port to connect directly with a Windows
l
device, for the
Telnet/SSH: Allow or disallow telnet connection to the unit (e.g., remote terminals, Customer Sup-
l
port troubleshooting, CLI or automation via scripts).
Share Results: Enables direct transfer of saved results from a V150 unit to a Windows PC. To dir-
l
ectly transfer files, connect the unit to a PC via an OTG cable, set the OTG port to
turn on Saved Results. If Share Results is OFF, results are saved to the internal partition of the unit
and can be transferred to a USB using the
To directly transfer saved files to a PC, refer to the Share Results function.
Platform Functions
Share Results
function.
Utility Settings - General Setting
© VeEX Inc. All Rights Reserved.
"USB Memory Browser" on page 68
®
PC, as a storage
Device mode
and
in the File Manager.
124
Advertisement
