Advertisement
Trace Route Setup
The following setup selections are available:
Profile: Delete, Save, Save as..., Default. Select Default to recall a trace route file or create a new
l
test
Destination: Enter the IP address or URL of the network device to be detected
l
Time Out: Enter the maximum time allowed between an ICMP echo and response at each hop
l
Max Hop: Enter the maximum number of network devices the packet is allowed to transit
l
Once the parameters are configured, press Start to begin the test.
Ethernet
Trace Route - Setup
Trace Route - Results
© VeEX Inc. All Rights Reserved.
36
Advertisement
