Advertisement
Dual Port LED Status Lights
The color indicates the alarm status:
Green: No error or alarm is present
l
Red: An error or alarm condition is currently detected
l
Red flashing: Event history reminder. Any error or alarm has occurred in the past, but no longer
l
present.
Yellow: An error or alarm was detected during the measurement interval but is no longer present or
l
active
Grey: Status not applicable or the test has not begun yet
l
For test modes that support dual ports, P1 and P2 indicates the port in operation.
Basic Operation
Signal: A valid input signal is detected
l
Frame: Valid framing on the input signal is detected
l
Pattern: Indicates test pattern synchronization in BERT, RFC, and Throughput
l
modes
Alarm/Error: Alarms or errors are detected
l
Signal: A valid input signal is detected
l
Frame: Valid framing on the input signal is detected
l
Pattern: Indicates test pattern synchronization in BERT, RFC, and Throughput
l
modes
Alarm/Error: Alarms or errors are detected
l
Test Ports: P1 (port 1) and P2 (port 2) can be used to switch views in dual port
l
mode
© VeEX Inc. All Rights Reserved.
24
Advertisement
