Parameter Reference; Pull-Down Menus Via Simatic Pdm; Quick Start Wizard - Siemens SITRANS LR250 Instruction Manual

Parameter Reference

Parameters are identified by name and organized into function groups. Menus arranged
on up to five levels give access to associated features and options.
Parameters accessible via the handheld programmer are preceded by a number. (See
LCD menu structure
accessible only via SIMATIC
Some parameters are accessible in SIMATIC PDM via pull-down menus. Where those
parameters can also be accessed via the handheld programmer, they are found in the
numbered list, and directions for SIMATIC PDM are given beside the individual
parameter. Page references for further information can be found under
via SIMATIC PDM

Pull-down menus via SIMATIC PDM

Device menus
Communication path
Download to device
Upload to PC/PG
Update diagnostic status
Quick Start
Auto False Echo Suppression
TVT shaper
Maintenance
Selftest
Reset
Configuration Flag Reset
D/A Trim
Write Locking
Simulate AO
HART Communication
Simulation
Sensor Calibration

Quick Start Wizard

The Quick Start wizard groups together all the settings you need to configure for a simple
application.
• The wizard is a complete package and settings are inter-related.
• Because the settings are inter-related, the initial Quick Start parameter values are
not default values and do not necessarily reflect the current device configuration.
• Do not use the wizard to modify individual parameters.
• You can access the Quick Start wizard either via SIMATIC PDM, or via the handheld
programmer.
7ML19985JE01
on page 115 for a chart.)
PDM.
below.
page
-
-
-
-
62
74
76
87
-
87
-
42
48
42
87
42
50
SITRANS LR250 (HART) – INSTRUCTION MANUAL
Parameters not preceded by a number are
View menus
Display
Trend
Echo Profile
Show Echo Profile
Status
Read Analog Value
Clear Faults
Peak Values
Wear
Pull-down menus
page
-
37
37
37
-
-
-
52
48
Page 61