Incoming Call Notification Window Timer Setup; Linked Mode - Cisco 8831NR Administration Manual

Incoming Call Notification Window Timer Setup

Configuring calling party normalization alleviates issues with toll bypass where the call is routed to multiple
locations over the IP WAN. In addition, it allows Cisco Unified Communications Manager to distinguish the
origin of the call to globalize or localize the calling party number for the conference phone user.
The conference phone itself can localize the calling party number. For the phone to localize the calling party
number, you must configure the Calling Party Transformation CSS or the Use Device Pool Device Calling
Party Transformation CSS setting in the Phone Configuration window.
Depending on your configuration for globalizing and localizing the calling party number, the phone user may
see a localized number, a globalized number with access codes and prefixes, or the international escape
character, +, in the calling party number. If a phone supports calling party normalization, the phone can show
the localized calling party number on the conference phone screen and the globalized number in the call log
directories on the conference phone.
In addition, these devices show both the globalized and localized calling party number in the Call Details. If
a conference phone does not support calling party normalization, the device shows the localized calling party
on the conference phone screen and in the call log directories on the phone.
For information on how to configure this feature for your conference phone, see "Calling Party Normalization",
Cisco Unified Communications Manager Features and Services Guide.
Incoming Call Notification Window Timer Setup
You can set the time that the Incoming Call Notification Window, sometimes called a toast, displays on the
conference phone. You set up the feature from one of the following Cisco Unified Communications Manager
windows:
• Enterprise Phone Configuration (System > Enterprise Phone)
• Common Phone Profile Configuration (Device > Device Settings > Common Phone Profile)
• Phone Configuration (Device > Phone)
The following table describes the Incoming Call Toast Timer.
Table 30: Incoming Call Notification Window Timer Field
Field
Incoming Call Toast Timer

Linked Mode

Two conference phone Sound Base units can be linked together to expand the audio coverage area. One Sound
Base acts as the primary device, and the other unit acts as the dependant or secondary device.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
98
Description
Gives the time, in seconds, that the
toast displays. The time includes
the fade-in and fade-out times for
the window.
The possible values are 3, 4, 5, 6,
7, 8, 9, 10, 15, 30, and 60.
Features, Templates, Services, and User Setup
Default Value
5 seconds.