Cisco 8831NR Administration Manual page 164

Perform Final End User Configuration Steps
the user's name, then choose Add Selected. The user's name and user ID should now appear in the Users
Associated With Line pane of the Directory Number Configuration window.
i) Select Save. The user is now associated with Line 1 on the phone.
j) If your phone has a second line, configure Line 2.
k) Associate the user with the device:
Step 3 Proceed to
Perform Final End User Configuration Steps
If you are not already in the End User Configuration window, choose User Management > End User to
perform some final configuration tasks. Use the Search fields and Find to locate the user (for example, John
Doe), then click on the user ID to get to the End User Configuration window for the user.
In the End User Configuration window, follow these steps:
Procedure
Step 1
In the Directory Number Associations area of the screen, set the primary extension from the drop-down list.
Step 2 In the Mobility Information area, check the Enable Mobility box.
Step 3
In the Permissions Information area, use the User Group buttons to add this user to any user groups.
For example, you may want to add the user to a group that is defined as a Standard CCM End User Group.
Step 4
To view all configured user groups, choose User Management > User Group.
Step 5 In the Extension Mobility area, check the Enable Extension Mobility Cross Cluster box if the user is allowed
for Extension Mobility Cross Cluster service.
Step 6 Select Save.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
154
• Choose User Management > End User.
• Use the search boxes and the Find button to locate the user you have added (for example, doe for
the last name).
• Select the user ID (for example, johndoe). The End User Configuration window appears.
• Select Device Associations.
• Use the Search fields and the Find button to locate the device with which you want to associate to
the user. Select the device, then choose Save Selected/Changes. The user is now associated with
the device.
• Click Go next to the "Back to User" Related link in the upper-right corner of the screen.
Perform Final End User Configuration Steps, on page
Basic Phone Administration Steps
154.