Cisco 8831NR Administration Manual page 38

Cisco Unified IP Conference Phone Deployment
If the initiator phone is configured for encryption, the barge initiator can barge into a nonsecure call from the
encrypted phone. After the barge occurs, Cisco Unified Communications Manager classifies the call as
nonsecure.
If the initiator phone is configured for encryption, the barge initiator can barge into an encrypted call, and the
phone indicates that the call is encrypted.
Cisco Unified IP Conference Phone Deployment
When deploying a new IP telephony system, system administrators and network administrators must complete
several initial configuration tasks to prepare the network for IP telephony service. For information and a
checklist for setting up and configuring a complete Cisco IP telephony network, see the "System Configuration
Overview" chapter in the Cisco Unified Communications Manager System Guide.
After the IP telephony system is setup and you have configured system-wide features in Cisco Unified
Communications Manager, phones can be added to the system.
For an overview of procedures used to add phones to your network, see the "Installation" and "Setup in Cisco
Unified Communications Manager" sections of this guide.
Cisco IP Phone Setup in Cisco Unified Communications Manager
To add conference phones to the Cisco Unified Communications Manager database, you can use:
• Autoregistration
• Cisco Unified Communications Manager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For more information about these choices, see
Methods, on page
For general information about configuring conference phones in Cisco Unified Communications Manager,
see
• "Cisco Unified IP Phones", Cisco Unified Communications Manager System Guide
• "Cisco Unified IP Phone Configuration", Cisco Unified Communications Manager Administration Guide
• "Autoregistration Configuration",Cisco Unified Communications ManagerAdministration Guide
Set Up the Cisco Unified IP Conference Phone in Cisco Unified Communications Manager
Administration
The following steps provide an overview and checklist of configuration tasks for the conference station in
Cisco Unified Communications Manager Administration. The steps present a suggested order to guide you
through the conference phone configuration process. Some tasks are optional, depending on your system and
user needs. For detailed information, see the sources listed.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
28
39.
Cisco Unified IP Conference Phone 8831 and 8831NR
Cisco Unified Communications Manager IP Phone Addition