Cisco 8831NR Administration Manual page 74

Set Admin VLAN ID
Set Admin VLAN ID
Procedure
Step 1 Choose Apps > Admin Settings > Network Configuration > Admin VLAN ID.
Enter your password at the prompt.
Step 2 Enter a new Admin VLAN ID.
Step 3
Press Apply, and then Save.
IPv4 Setup Menu Options
The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select the
IPv4 option on the Network Setup menu.
The following table describes the IPv4 Setup menu options.
For information about the keys you can use to edit options, see
61.
Table 21: IPv4 Setup Menu Options
Option
DHCP
IP Address
Subnet Mask
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
64
Value Input and Editing Guidelines, on page
Description
Indicates whether the conference
phone has DHCP enabled or
disabled.
When DHCP is enabled, the DHCP
server assigns the conference phone
an IP address. When DHCP is
disabled, the administrator must
manually assign an IP address to
the phone.
For more information, see DHCP
Usage, on page 68.
Internet Protocol (IP) address of the
conference phone.
If you assign an IP address with this
option, you must also assign a
subnet mask and default router. See
the Subnet Mask and Default
Router options in this table.
Subnet mask used by the phone.
Cisco Unified IP Conference Phone Settings
To Change
Set DHCP, on page 65
Set IP Address, on page 66
Set Subnet Mask, on page 66