Network Configuration Area - Cisco 8831NR Administration Manual

Network Configuration Area

Item
Model Number
Message Waiting
UDI
Time
Time Zone
Date
Network Configuration Area
The Network Configuration area on a conference phone web page displays network configuration information
and information about other conference phone settings. The following table describes this information.
You can view and set many of these items from the Network Configuration Menu and the Device Configuration
Menu on the conference phone.
To display the Network Configuration area, access the web page for the conference phone as described in the
Access Web Page, on page 112
Item
DHCP Enabled
MAC Address
Host Name
IP Address
Subnet Mask
Default Router 1
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
114
Model number of the conference phone.
Indicates if there is a voice message waiting for this conference phone.
Displays the following Cisco Unique Device Identifier (UDI) information
about the conference phone:
• Device Type: Indicates hardware type. For example, phone displays
for all phone models
• Device Description: Displays the name of the conference phone
associated with the indicated model type
• Product Identifier: Specifies the conference phone model
• Serial Number: Displays the conference phone unique serial number
Time obtained from the Date/Time Group in Cisco Unified
Communications Manager to which the conference phone belongs.
Time zone obtained from the Date/Time Group in Cisco Unified
Communications Manager to which the conference phone belongs.
Date obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the conference phone belongs.
section, and then click the Network Configuration hyperlink.
Description
Indicates whether DHCP is being used by the conference phone.
MAC address of the conference phone.
Host name that the DHCP server assigned to the conference phone.
IP address of the conference phone.
IP address of the subnet mask used by the conference phone.
Default router used by the conference phone (Default Router 1).
Remote Monitoring