Cisco 8831NR Administration Manual page 94

Available Telephony Features
Feature
Monitoring and Recording
Mute
No Alert Name
Onhook Dialing
Other Group Pickup
Phone Display Message for
Extension Mobility Users
Plus Dialing
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
84
Description
Allows a supervisor to silently monitor an active
call. The supervisor cannot be heard by either party
on the call. The user might hear a monitoring
audible alert tone during a call when it is being
monitored.
When a call is secured, the security status of the call
is displayed as a lock icon on Cisco Unified IP
Phones. The connected parties might also hear an
audible alert tone that indicates the call is secured
and is being monitored.
When an active call is being monitored
Note
or recorded, the use can receive or place
intercom calls; however, if the user place
an intercom call, the active call will be
put on hold, which causes the recording
session to terminate and the monitoring
session to suspend. To resume the
monitoring session, the party whose call
is being monitored must resume the call.
Mutes the conference phone from the Sound Base,
DCU or connected external microphones.
Makes it easier for end users to identify transferred
calls by displaying the original caller's phone
number. The call appears as an Alert Call followed
by the caller's telephone number.
Allows a user to dial a number without going off
hook.
Allows a user to answer a call ringing on a phone
in another group that is associated with the user's
group.
This feature enhances the phone interface for the
Extension Mobility user by providing friendly
messages.
Allows the user to dial E.164 numbers prefixed with
a plus (+) sign.
To dial the + sign, the user needs to press and hold
the star (*) key for at least 1 second. This applies
to dialing the first digit for an on-hook (including
edit mode) or off-hook call.
Features, Templates, Services, and User Setup
Configuration Reference
For more information, see Features and
Services Guide for Cisco Unified
Communications Manager, "Monitoring
and Recording" chapter.
Requires no configuration.
Requires no configuration.
For more information, see Cisco Unified IP
Conference Phone 8831 User Guide.
For more information, see Features and
Services Guide for Cisco Unified
Communications Manager, "Call Pickup"
chapter.
No configuration required.
No configuration required.