Cisco 8831NR Administration Manual page 92

Available Telephony Features
Feature
Hold Reversion
Hold Status
Hold/Resume
HTTP Download
Jitter Buffer
Linked Mode
Malicious Caller Identification
(MCID)
Meet Me Conference
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
82
Description
Limits the amount of time that a call can be on hold
before reverting back to the phone that put the call
on hold and alerting the user.
Reverting calls are distinguished from incoming
calls by a single ring (or beep, depending on the
new call indicator setting for the line). This
notification repeats at intervals if not resumed.
A call that triggers Hold Reversion also displays an
animated icon in the call bubble.
You can configure call focus priority to favor
incoming or reverting calls.
Enables phones with a shared line to distinguish
between the local and remote lines that placed a call
on hold.
Allows the user to move a connected call from an
active state to a held state.
Enhances the file download process to the phone to
use HTTP by default. If the HTTP download fails,
the phone reverts to using the TFTP download.
The Jitter Buffer feature handles jitter from 10
milliseconds (ms) to 1000 ms for both audio and
video streams.
Enhances the audio coverage area by using a daisy
cable to connect two conference phone Sound Base
units.
When linked, voice, dial tone, ringer and base LED
features are synchronized between the two devices.
Allows users to notify the system administrator
about suspicious calls that are received.
Allows a user to host a Meet Me conference in
which other participants call a predetermined
number at a scheduled time.
Features, Templates, Services, and User Setup
Configuration Reference
For more information about configuring
this feature, see Features and Services
Guide for Cisco Unified Communications
Manager, "Hold Reversion" chapter.
No configuration is required.
• Requires no configuration, unless you
want to use Music On Hold. See
"Music On Hold" in this table for
information.
• See "Hold Reversion" in this table.
No configuration is required.
No configuration required.
For more information see:
• Cisco Unified IP Conference Phone
8831 User Guide, "Conference Phone
Link Mode"
For more information, see:
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phones"
• Features and Services Guide for Cisco
Unified Communications Manager,
"Malicious Call Identification"
For more information, see Cisco Unified
Communications Manager Administration
Guide, "Meet-Me Number and Pattern
Setup" chapter.