Network Settings; Cisco Unified Ip Phone Security - Cisco 8831NR Administration Manual

Network Settings

2. The screen displays the Cisco Systems, Inc., logo screen.
3. The screen displays the Revolabs, Inc., splash screen
4. This message appears as the conference phone starts up.
5. The home screen displays:
If the conference phone successfully passes through these stages, it has started up properly. If the conference
phone does not start up properly, see
Network Settings
If you are not using DHCP in your network, you must configure these network settings on the conference
phone after installing it on the network:
• IP address
• IP subnet information (subnet mask)
• TFTP server IP address
• You also may configure the domain name and the DNS server settings, if necessary.
Collect this information before you start to configure the conference phone.
Related Topics

Cisco Unified IP Phone Security

The security features protect against several threats, including threats to the identity of the conference phone
and to data. These features establish and maintain secure communication streams between the conference
phone and the Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
For more information about the security features, see
on page 20
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
54
Hardware Test
Flash is Accessible
RAM Test Successful
Ethernet Test Successful
• Phone is not registered
• Current date and time
• Primary directory number
• Softkeys
Cisco Unified IP Conference Phone
and also consult the Cisco Unified Communications Manager Security Guide.
Sound Base LEDs
Green LEDs flash
Green LEDs flash
—
Startup Problems, on page 121.
Settings, on page 59
Cisco Unified IP Conference Phone Security Features,
Cisco Unified IP Conference Phone Installation
DCU LEDs
Red and Green LEDs flash
Red and Green LEDs flash
—