Cisco 8831NR Administration Manual page 72

User Interface Menus
User Interface Menus
Network Setup Menu
The Network Setup menu provides options for viewing and configuring a variety of network settings. The
following table describes these options and, where applicable, explains how to change them.
For information about how to access the Network Setup menu, see Display Configuration menu.
Table 20: Network Setup Menu Options
Option
IPv4 Setup
Host Name
Domain Name
Operational VLAN ID
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
62
Description
In the IPv4 Setup submenu, you can
do the following:
• Enable or disable the phone to
use the IP address that is
assign by the DHCP server.
• Manually set the IP Address,
Subnet Mask, Default Routers,
DNS Server, and Alternate
TFTP servers.
For more information on the IPv4
address fields, see IPv4 Setup
Menu Items.
Unique host name that the DHCP
server assigned to the phone.
Name of the Domain Name System
(DNS) domain in which the phone
resides.
Auxiliary Virtual Local Area
Network (VLAN) configured on a
Cisco Catalyst switch in which the
phone is a member.
If the phone has not received an
auxiliary VLAN, this option
indicates the Administrative
VLAN.
If neither the auxiliary VLAN nor
the Administrative VLAN are
configured, this option defaults to
a VLAN ID of 4095.
Cisco Unified IP Conference Phone Settings
To Change
Scroll to IPv4 Setup and press
Select.
Display only—Cannot configure.
See Set Domain Name, on page
Display only—Cannot configure.
The phone obtains its Operational
VLAN ID via Cisco Discovery
Protocol (CDP) from the switch to
which the phone is attached. To
assign a VLAN ID manually, use
the Admin VLAN ID option.
63.