Cisco 8831NR Administration Manual page 51

Cisco Unified IP Phones and Telephony Networks
Related Topics
Autoregistration and TAPS IP Phone Addition
You can add phones with autoregistration and TAPS, the Tool for Auto-Registered Phones Support, without
first gathering MAC addresses from phones.
TAPS works with the Bulk Administration Tool (BAT) to update a batch of conference phones that were
previously added to the Cisco Unified Communications Manager database with dummy MAC addresses. Use
TAPS to update the MAC addresses and to download predefined configurations for conference phones.
Note Cisco recommends that you use autoregistration to add fewer than 100 conference phones to your network.
To add more than 100 conference phones to your network, use the Bulk Administration Tool (BAT).
To implement TAPS, dial a TAPS directory number and follow voice prompts. When the process is complete,
the conference phone has downloaded the directory number (DN) and other settings. The conference phone
has also been updated in Cisco Unified Communications Manager Administration with the correct MAC
address.
Autoregistration must be enabled in Cisco Unified Communications Manager Administration for TAPS to
function. You can do this from System > Cisco Unified CM.
Note When you configure the client for mixed mode through the Cisco CTL client, autoregistration is automatically
disabled. When you configure the cluster for nonsecure mode through the Cisco CTL client, autoregistation
is automatically enabled.
For more information, see "Bulk Administration", Cisco Unified Communications Manager Administration
Guide and "Tool for Auto-Registered Phones Support", Cisco Unified Communications Manager Bulk
Administration Guide.
Related Topics
Cisco Unified Communications Manager Administration Conference Station
Addition
You can add conference phones individually to the Cisco Unified Communications Manager database by
using Cisco Unified Communications Manager Administration. To do so, you first need to obtain the MAC
address for each conference phone.
After you collect MAC addresses, in Cisco Unified Communications Manager Administration, choose Device >
Phone, and then click Add New to begin the addition process.
Autoregistration and TAPS IP Phone
Cisco Unified Communications Manager Administration Conference Station
BAT IP Phone Addition, on page 42
Autoregistration IP Phone Addition, on page 40
Cisco Unified Communications Manager Administration Conference Station
BAT IP Phone Addition, on page 42
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
Autoregistration and TAPS IP Phone Addition
Addition, on page 41
Addition, on page 41
Addition, on page 41
41