Swap Between Active And Held Calls; Call Park; Place A Call On Hold With Call Park - Cisco 8832 User Manual

Calls
• Single ring, repeating at intervals
• Flashing amber line button
• Flashing message indicator on the handset
• Flashing LED bar
• Visual notification on the phone screen
Procedure
Press the flashing amber line button or Answer to resume the held call.

Swap Between Active and Held Calls

You can easily switch between active and held calls.
Procedure
Press Swap to switch to the held call.

Call Park

You can use your phone to park a call.
A parked call is monitored by your network so you won't forget about it. If the call remains parked for too
long, you hear an alert. You can then answer, decline to answer, or ignore the call on your original phone.
You can also continue retrieving it from another phone.
If you don't answer the call within a certain length of time, it's routed to voicemail or another destination, as
set by your administrator.

Place a Call on Hold with Call Park

You can park an active call that you answered on your phone and then use another phone in the call control
system to retrieve the call.
You can park only one call at the call park number.
Before you begin
Your call must be active.
Swap Between Active and Held Calls
Cisco IP Conference Phone 8832 User Guide
37