Operation
Example:
output format
ASCII
54
4.12.6 Starting the data transmission at the Turb
(at MultiLab
The measured values are automatically output to the interfaces
(= AutoPrint).
With a printer connected or a connection to a terminal program existing, you
can transmit data in the following ways:
Individual data
(e.g. calibration re-
cord, AQA record,
measured value)
Stored measured
values
4.12.7 Examples of data transmitted (printer, terminal program)
The data are output according to the selected output format.
The ASCII output format delivers formatted datasets.
®
Turb
750 IR Ser. no. 12345678
15.01.20 09:56:20
ID: 1
10.1 NTU [AQA]
[3-P StdCAL] : 15.01.20 08:57:45
________________________________________
®
Turb
750 IR Ser. no. 12345678
15.01.20 08:48:08
ID: 1
26.1 NTU [AQA]
[3-P StdCAL] : 15.01.20 08:57:45
________________________________________
etc...
®
Importer, printer, terminal program
Display the data and press <PRT
The data being shown on the display are transmit-
ted to the interface.
Simultaneously with every manual storage pro-
cess.
Display the saved data and press <PRT
All datasets according to the filter criteria
(section 4.7) via the RS232/USB output function
(see section 4.11.2.).
®
Turb
750 IR/T
®
750 IR/T
(8)
>.
(8)
>.
ba77233e05
06/2023