Erasing Stored Measurement Datasets; Transmitting Data; Establishing The Connection To A Pc - Xylem WTW Turb 750 IR Operating Manual

Operation
System require-
ments (PC)
50

4.11.5 Erasing stored measurement datasets

You can erase the stored measurement datasets altogether if you no longer
need them.
Erasing all measurement datasets is done in the menu, Configuration / Sys-
tem / Measured value memory / Delete.
Erasing individual datasets is not possible. If all memory loca-
tions are occupied, however, it is possible to overwrite the oldest
dataset at a time. A security prompt appears before a dataset is
overwritten.

4.12 Transmitting data

To transmit data via the interfaces, first establish a connection to a PC or
printer (see section 4.12.1).
With the PC software Turb
transmit or save measurement and calibration data for GLP-compliant data
management to Turb
®
With the MultiLab Importer (an add-in for Microsoft Excel) you can transmit
data from the meter directly to an open Excel sheet (see section 4.12.3).
The connection to a printer or terminal program has to be configured so data
can be safely transmitted (see section 4.12.4).
More info for software developers (e.g. for LIMS):
Contact the service department.

4.12.1 Establishing the connection to a PC

Via the USB interface you can transmit and evaluate data to a PC.
Microsoft Windows PC with one of the following operating systems:
– Windows 7
– Windows 8
– Windows 10.
1 Connect the Turb
the enclosed USB cable.
Microsoft Windows automatically searches a suitable USB driver.
®
Data you can, without further configuration,
®
Data or transmit them to Excel and thus to LIMS.
®
750 IR/T to the PC via the USB-B interface with
®
Turb 750 IR/T
ba77233e05 06/2023