Displaying Measurement Datasets; Outputting Measurement Datasets To The Interfaces - Xylem WTW Turb 750 IR Operating Manual

®
Turb 750 IR/T
Representation of
a dataset
Quitting the
display
ba77233e05 06/2023
Menu item Setting/function
ID
Date

4.11.3 Displaying measurement datasets

You can read out stored datasets to the display. Only those datasets are dis-
played that correspond to the selected filter criteria (see section 4.11.2).
Start reading out the data to the display in the menu, Configuration / System
/ Measured value memory / Display.
15.01.2020 11:24:16
ID: 1
16.80 FNU/NTU
[QuickCAL]
09.01.2020 07:54:53
i Scroll with UP DWN
Further datasets that correspond to the filter criteria are displayed with the
< > < > keys.
To quit the display of stored measurement datasets, you have the following
options:
 Switch directly to the measured value display with <M
sure).
 Leave the display and switch to the superordinate menu with <ESC> or
<START/ENTER

4.11.4 Outputting measurement datasets to the interfaces

You can output stored datasets to the interface. Only those datasets are
downloaded that correspond to the selected filter criteria (see
section 4.11.2).
The datasets are downloaded in the specified output format (see
section 4.12.5).
The output of the data to the interface is started in the menu, Configuration /
Measured value memory / RS232 download.
(.)
>.
Explanation
Entry of filter criteria
These menu items are made vis-
ible by selecting the filter criteria
in the Filter menu.
(9)
> (short pres-
Operation
49