®
Turb
750 IR/T
ba77233e05
06/2023
2
If a suitable USB driver was found:
Install the driver.
Follow the Windows installation instructions.
If no suitable USB driver was found:
Insert the supplied CD-ROM into the CD drive of your PC.
Install the driver.
Follow the Windows installation instructions.
The connection to the PC is established. The data can be transferred
to the PC:
via the PC software Turb
via the MultiLab
via a terminal program (see section 4.12.6).
The meter is listed as a virtual COM interface among the connec-
tions in the Windows instrument manager.
Only one cable may be connected to an interface (RS232 or
USB) of the meter at a time.
4.12.2 Data transmission with the PC software Turb
With the PC software Turb
®
Turb
Data any measurement- and calibration data for GLP compliant data
management (menu item File / Save as... / *. csv (CSV format)) or transmit
and save to Excel (menu item Data exchange / Export (.xls)) and thus trans-
fer to LIMS.
1
Establish the connection to a PC (see section 4.12.1).
2
Transmit data (see operating manual of the PC software Turb
4.12.3 Data transmission with the Excel add-in MultiLab
Set the CSV output format for datasets at the Turb
is selected in the menu, Configuration / System / Interface / Out-
put format (see section 4.12.5 E
A PRINTER
1
Establish the connection to a PC (see section 4.12.1).
2
Establish a data connection (see operating manual
®
MultiLab
Importer).
3
Transmit data (see section 4.12.6).
®
Data (see section 4.12.2)
®
Importer (see section 4.12.3)
®
Data you can transmit and save to the
).
®
Data
®
Importer
®
STABLISHING THE CONNECTION TO
Operation
®
Data).
750 IR/T. It
51