Operation
Forgotten the
password?
Inserting a 28 mm
cell
16
Contact the administrator.
4.4
Inserting a cell
Before using a cell for the first time, determine and mark the suitable measur-
ing position for the cell (see section 4.5.1).
1
Push the dust cover (1) upward.
The cell shaft for 28 mm cells is open.
2
Insert the marked cell so that it is positioned on the bottom of the cell
shaft.
3
Align the cell marking (3) with the marking (4) of the cell shaft.
The cell is ready to be measured.
4.5
Preparing the cell and sample
Standard solutions and test samples are filled into cells for calibration and tur-
bidity measurement with the Turb
1
3
4
®
750 IR/T.
®
Turb
750 IR/T
ba77233e05
06/2023