Starting The Data Transmission At The Turb 430 Ir/T - Xylem WTW Turb 430 IR/T Operating Manual

Turb 430 IR/T
Socket assign-
ment (RS232)
ba75507d09 08/2021
3
1 RTS
2 RxD
2
4
6
3 TxD
5 1
4 DTR
5 SG
6 CTS
RS 232
REC
1 Connect the RS232 interface to the external printer with the AK540/
S cable.
The Turb 430 IR/T is pre-configured for the connection of the
printer.
2 For error-free data transmission:
The RS232 interface of the Turb 430 IR/T and the printer have to be
set to the same transmission speed (Baudrate).
 The baud rate of the Turb 430 IR/T is selected in the menu Kon-
figuration / System / Schnittstelle / Baudrate.
 The setting of the baud rate of the printer and the default setting
are in the documentation of your printer.
3 Selecting the output format of datasets (Turb 430 IR/T)
It is selected in the menu, Konfiguration / System / Schnittstelle / Aus-
gabeformat.
Examples of the output formats (see section 4.9.7)
4 Transmitting data (see section 4.9.6).
Examples of transmitted data (see section 4.9.7)

4.9.6 Starting the data transmission at the Turb 430 IR/T

(at MultiLab
With a printer connected or a connection to a terminal program existing, you
can transmit data in the following ways:
Individual data
(e.g. measured val-
ue, calibration pro-
tocol)
®
Importer, printer, terminal program
 Display the data and press <PRT>.
The data being shown on the display are transmit-
ted to the interface.
 Simultaneously with every manual storage pro-
cess.
Operation
39