Table of Contents
Advertisement
Operation
Setting the date,
time and date
format
22
4.6.4 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated
in the status line of the measured value display. When storing measured val-
ues and calibrating, the current date and time are automatically stored as
well.
Numerals are generally entered via the number keys.
The correct setting of the date and time and date format is important for the
following functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
Therefore, check the time at regular intervals.
The date and time are reset to default after a fall of the supply
voltage (empty batteries).
The date format can be switched from the display of day, month, year
(dd.mm.yy) to the display of month, day, year (mm/dd/yy or mm.dd.yy).
1
In the measured value display:
Open the Configuration menu with <MENU
The instrument is in the configuration mode.
2
Using < > < > and <START/ENTER
menu System / Continue ... / Date/time.
Date/time
:
Time
:
Date
:
Date format
3
Select and confirm the Time menu with < > < > and <START/EN-
(.)
TER
>.
A display for the entry of numerals with the number keys opens up.
Keys with additional characters printed on (orange) are assigned
doubly. In the input fields you can directly enter digits with the or-
ange number keys.
(.)
14:53:40
15.01.20
dd.mm.yy
®
Turb
750 IR/T
(7)
>.
>, select and confirm the
ba77233e05
06/2023
Advertisement
Table of Contents
