Operation
52
4.12.4 Configuration for the data transmission to a terminal program
Via the USB interface you can also transmit data to a PC with the aid of a so-
called terminal program.
1
Establish the connection to a PC (see section 4.12.1).
2
Determine the output format of datasets at the Turb
section 4.12.5 E
It is selected in the menu, Configuration / System / Interface / Output
format.
Examples of the output formats (see section 4.12.6)
3
Configure the USB interface at the Turb
program.
The transmission data specified in the Turb
program have to match.
USB interface (see section 4.7.3).
Terminal (see operating manual of your terminal).
Transmission data:
Baud rate
Handshake
Parity
Data bits
Stop bits
4
Transmit data (see section 4.12.6).
Examples of transmitted data (see section 4.12.7)
STABLISHING THE CONNECTION TO A PRINTER
can be selected from: 1200, 2400, 4800, 9600,
19200
none
None
8
1
Turb
®
750 IR/T (see
®
750 IR/T and the terminal
®
750 IR/T and terminal
ba77233e05
®
750 IR/T
06/2023