Table of Contents
Advertisement
®
Turb
750 IR/T
Entry modes
ba77233e05
06/2023
Time
14:53:40
4
Enter the time using the number keys.
The digit to be changed is displayed underlined.
In the case of wrong entries, you can cancel the procedure with
<ESC>.
After canceling with <ESC>, it is possible to enter all digits once
again. The new digits are only taken over by confirming with
<START/ENTER
5
Confirm the setting with <START/ENTER
The time is set.
6
Set the current Date as necessary. The setting is made similarly to
that of the time.
7
Change the date format as necessary.
8
To make further settings, switch to the next higher menu level with
<ESC>.
or
Switch to the measured value display with <M
The instrument is in the measuring mode.
4.6.5 Example 3 on navigation: Entering numerals and text
Entry fields of the Turb
simple numbers (e.g. for entering date and time)
Numbers with decimal separators (e.g. turbidity setpoints)
Strings of digits, letters and special characters (e.g. measured value ID)
Two entry modes are available for entering characters.
Up to 12 characters are allowed in entry fields.
(.)
>.
®
750 IR/T require different kinds of entries:
Operation
(.)
>.
(9)
> (short pressure).
23
Advertisement
Table of Contents
