Keypad - Xylem WTW Turb 750 IR Operating Manual

®
Turb 750 IR/T
Key functions
ba77233e05 06/2023
1.2

Keypad

In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <STO
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g. <STO
(9)
<M >
(4)
<CAL >
(1)
<QuickCAL >
(2)
<AQA >
(5)
<A-Z _>
(5)
<A-Z >
(.)
<START/ENTER >
(7)
<MENU >
<On/Off>
(8)
<PRT >
(0)
<STO >
(0)
<STO _>
(6) (3)
< >, < >
<ESC>
Entering numerals with the number keys (see E
: E
IGATION
(0)
>) generally indicates a short keystroke (under
Switch to the measured value display
Start calibration
Start simplified calibration with one standard.
Start the checking of the meter with AQA stan-
dards
The key is only active if any AQA checks were
activated.
Select the entry mode in an entry field
Numerical or alphanumerical entry
Display the next digit in an entry field with active
alphanumeric entry
(same function as <
Open menus / confirm entries /
start measurement
Call up the Configuration menu
(all settings are made here)
Switch the meter on or off
Output display contents to RS232 or USB inter-
face (e.g. print)
Open the Store menu: <STO
Quick storing: 2 x <STO
Open the measured value memory
Highlight menu items or selection;
Set values
Switch to the next higher menu level /
cancel input
NTERING NUMERALS AND TEXT
Overview
(0)
_>).
(6)
>)
(0)
>
(0)
>
3
XAMPLE ON NAV
, page 23).
-
7