Assa Abloy Corbin Russwin PED5000 D Series Installation Instructions Manual page 25

Premium Delayed Egress
PED4000 D, PED5000 D Series Exit Device
Installation Instructions
8 Input and Output Connector Designations, Continued
NOTE: ElectroLynx QC12 Hinge is required if Electrified ET, Secure (SEC) Relay and/or if any other additional non-
default wiring is required.
J201
Green LED
(Motor Status)
Orange LED
(Door Status)
Red LED
(Push Rail Status)
Yellow LED
(Latch Bolt Status)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without
the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
S2
Figure 11
25
J200
Top View
Bottom
View
FM574 01/23