Assa Abloy Corbin Russwin PED5000 Series Installation Instructions Manual

Installation Instructions
MELR Retrofit Kit
PED5000 / PED4000 Series Exit Devices
1
Remove the chassis cover and end cap.
3
Rail Insert
Remove insert from the rail.
WARNING
This product can expose you to
lead which is known to the state of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.
P65warnings.ca.gov.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access
and Egress Hardware Group, Inc. is prohibited.
End Cap
2
Loosen the chassis screws and remove end cap bracket.
Remove the rail from the door.
4
Squeeze the two clips in the front and slide the carrier / push
assembly back to release it from the end of the mount.
FM805 12/23
End Cap Bracket
WARNING
Attention Installer: Improper
installation may result in dam-
age to the product and void the
factory warranty.