Assa Abloy Corbin Russwin SN200 Series Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Assa Abloy Manuals
  4. Door locks
  5. Corbin Russwin SN200 Series
  6. Installation instructions manual
Assa Abloy Corbin Russwin SN200 Series Installation Instructions Manual

Assa Abloy Corbin Russwin SN200 Series Installation Instructions Manual

Wiegand/osdp exit devices
Hide thumbs Also See for Corbin Russwin SN200 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation Instructions
Attention Installer:
Please read these instructions carefully to prevent missing important steps.
Note: Improper installations may result in damage to the lock and void the factory warranty.
IThe accuracy of the door preparation is critical for proper functioning and security of this lock.
Misalignment can cause premature wear and a lessening of security.
Copyright © 2020-23, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA
ABLOY Access and Egress Hardware Group, Inc. is prohibited.
SN
SN200 Wiegand
SN210 OSDP
PED5000 Series Exit Devices
Includes MELR
Motorized Electric Latch Retraction
FM604 05/23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Corbin Russwin SN200 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Assa Abloy Corbin Russwin SN200 Series

Summary of Contents for Assa Abloy Corbin Russwin SN200 Series

  • Page 1 IThe accuracy of the door preparation is critical for proper functioning and security of this lock. Misalignment can cause premature wear and a lessening of security. Copyright © 2020-23, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc.

  • Page 2: Table Of Contents

    Installation Instructions PED5600 Mortise Exit Device ...... 34 MELR Configuration Check ..............43 Operational Check .................. 44 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...

  • Page 3: Regulatory Compliance

    • Do not touch pins, leads or solder connections on the circuit boards Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...

  • Page 4: Specifications

    For OSDP cable lengths greater than 200 ft (61 m) or EMF interference, install 120Ω +/- 2Ω resistor across RS-485 termination ends. Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...

  • Page 5: Wiring Diagrams

    PIN 3 (White – DATA_1) PIN 5 (Orange – RX NO) PIN 7 (Brown - EGND) Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 6 1KΩ UL294 is a United States based standard. Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 7 Failure to follow proper ESD safe grounding procedures could lead to equipment failure. UL294 is a United States based standard. Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 8 Failure to follow proper ESD safe grounding procedures could lead to equipment failure. Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 9 • 2-1/8” bore See document FM643 for part numbers Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

  • Page 10: Installation Instructions Ped5800 Cvr Exit Device

    Bottom Bolt Bottom Plate See document FM643 for part numbers Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 11 Switch SN200/210 Fig. 2 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 12 #1/2-20 x 2-3/8” Fig. 4B Fig. 4A Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 13 Detail Fig. 5 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 14 Reader Detail Fig. 6B Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 15 NOTE: Neatly fold excess wires into remaining space to prevent pinching wires when mounting inside escutcheon (Fig. 7E). Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 16 3. Install rail and screws per exit device instructions. Note: This view shows rim exit device version. Fig. 9 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 17 >>If you are installing MELR Exit Device << Continue to Section 10 Exit Device Controller Configuration Check Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 18 • Phillips Screwdriver (Standard size) • Slotted Screwdriver (Standard size) • 1/8" Allen Wrench Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...

  • Page 19: Installation Instructions Ped5400 Svr Exit Device

    Top Case Assembly Screw Pack (Top and Bottom Cases) See document FM643 for part numbers Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 20 EAC. SN200/210 Fig. 2 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 21 • (4) #10 wood screws for wood doors (or) • (4) #10-24 x 3/4” machine screws for metal doors Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 22 1. Fasten the plate with (1) #8 1 1/4” Phillips pan head self-drilling screw. *Note: For non-fire rated doors, omit the fire plate. Fig. 6 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 23 Reader Detail Fig. 8B Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 24 >>If you are installing MELR Exit Device << Continue to Section 10 Exit Device Controller Configuration Check Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...

  • Page 25: Installation Instructions Ped5200 Rim Exit Device

    Trim (Trim with gasket shown) Reference SN200/210 Catalog for Available Cylinders DPS Door Position Switch (not shown) Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 26 Trim (Trim with gasket shown) Reference SN200/210 Catalog for Available Cylinders DPS Door Position Switch (not shown) Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 27 Electric Hinge Fig. 2 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 28 1/4 -20 x 2-3/8” Flat Exit Chassis Head Machine Screw Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 29 Detail Fig. 6A Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 30 Reader Detail Fig. 7C Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 31 NOTE: Neatly fold excess wires into remaining space to prevent pinching wires when mounting inside escutcheon, cylindrical lock depicted (Fig. 8E). Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 32 2. Attach harness to female connector on chassis. 3. Install rail and screws per exit device instructions. Fig. 10 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 33 >>If you are installing MELR Exit Device << Continue to Section 10 Exit Device Controller Configuration Check Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...

  • Page 34: Installation Instructions Ped5600 Mortise Exit Device

    1” bore • 2-1/8” bore Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 35 Screw Pack (Mortise Lock) Strike Pack (Specify Bevel and Lip Length) Door Position Switch (not shown) Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 36 SN200/210 Hinge Fig. 2 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 37 Fig. 4B Trim Control Fig. 4A Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 38 Detail Fig. 5 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 39 Reader Detail Fig. 6C Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 40 Lever Fig. 7C Lever Arm Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 41 Inside of Door Fig. 9 Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 42 >>If you are installing MELR Exit Device << Continue to Section 10 MELR Exit Device Controller Configuration Check Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 43 NOTE: For more information, refer to MELR Installation Instructions (FM573) >> Refer to Section 5 for Wiring Diagrams to wire device to EAC panel << Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...

  • Page 44: Operational Check

    (e.g. if fail-secure, the outside lever should be rigid with power removed). B. If the function is incorrect, remove the lock and repeat section 6, step 3 (DIP Switch configuration). Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved.
  • Page 45 Credentials can be learned, as usual. Individual key press will be displayed for any key press, but they cannot be learned. Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written...
  • Page 46 SN200 / SN210 Series PED5000 Exit Devices Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 47 SN200 / SN210 Series PED5000 Exit Devices Copyright © 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc. FM604 05/23 All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
  • Page 48 Copyright © 2020-2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent - www.assaabloydss.com/patents.

This manual is also suitable for:

Corbin russwin sn210 seriesCorbin russwin ped5000 series

Table of Contents