Assa Abloy Corbin Russwin PED5000 D Series Installation Instructions Manual page 13

Premium Delayed Egress
PED4000 D, PED5000 D Series Exit Device
Installation Instructions
5 Wire Routing - continued
PED4200
OVERVIEW
Step 1 . Install chassis to rail .
Route wires through door as shown .
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without
the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Electric Trim
(If applicable)
13
M93 Lever Monitoring
(if applicable)
M91 Connection
Step 2 . Secure trim . Make M91 connection .
Step 3 . Pull additional wire slack through rail
from insert end and tuck latch bolt monitor
(M91) connection into chassis .
FM574 01/23