Assa Abloy Corbin Russwin PED5000 Series Installation Instructions

Installation Instructions
End Cap Mounting Plate
PED4000/PED5000 Series Exit Devices
1
Rail
Mounting plate
Slide mounting plate into rail, until the mounting plate is firmly against the rail.
WARNING
This product can expose you to
lead which is known to the state of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.
P65warnings.ca.gov.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Mounting screws
#10-24 Round head
Cover screws
#8-32 Oval head
End cap
WARNING
Attention Installer: Improper
installation may result in damage
to the product and void the factory
warranty.
FM610 01/23