Assa Abloy Corbin Russwin PED5000 D Series Installation Instructions Manual page 15

Premium Delayed Egress
PED4000 D, PED5000 D Series Exit Device
Installation Instructions
Wire Routing - continued
5
PED5800
Step 1 . Route wires as shown and
secure trim to door .
Step 3 . Install rail .
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without
the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
M91 Connection
Electric Trim
(If applicable)
M93 Lever Monitoring
(if applicable)
Step 4 . Make wire connections .
Main Slide & Roller
Step 6 . Tuck wire connections along side of
main slide . Pull back excess wire through rail .
15
Step 2 . Install chassis (Section 4) and route wires
through chassis as shown .
Step 5 . Snap trim jumper to clip
and route excess wire as shown .
ELECT TRIM
(IF APLICABLE)
FM574 01/23